SHB 28Z3 EN – Edition 2.0 * 28z3s311.fm 3-7
Maintenance
3.3 Maintenance plan (overview)
Work description
For service and maintenance work on the attachment, please refer to the operation and maintenance
manual of the attachment manufacturer as well.
Maintenance plan/service hours (s/h)
Service work
(daily)
Every 50 s/h
Every 250 s/h
Every 500 s/h
Every 1000 s/h
once a year
Every 1500 s/h
Every 2000 s/h
Customer
Authorised
workshop
Fluid and filter changes ( ):
Carry out the following oil and filter changes (check oil levels after test run):
• Engine oil
1
●●
• Engine oil filter
2
●●
• Fuel filter
3
●●
• Air filter element – maintenance display on filter
4
●●
• Coolant ●●
• Hydraulic oil filter insert
5
●●
• Hydraulic oil
6
●●
• Hydraulic oil tank breather ●●
• Cab air filter of heating system ●●
• Drain condensation water from hydraulic oil tank ●●
• Drive gearbox oil
7
●●
Inspection work ( ):
Check the following material. Refill if necessary:
• Engine oil ●●
• Engine coolant ●●
• Hydraulic oil ●●
• Fuel ●●
• Drive gearbox oil ●●
Clean water ducts
8
●●
Check pedal function ●●
Check radiator for engine and hydraulic oil for dirt. Clean if necessary ●●
Check cooling systems, heating and hoses for leaks and pressure (visual check) ●●
Check the pilot control filter on the main valve block for dirt, clean it if necessary ●●
Clean the cab air filter of the heating system ●●
Air filter (damage) ●●
Remove dust from dust valve ●●
Prefilter with water separator: drain water ●●
• Clean ●●
Maintenance
To Next Page
Loading...
