5-38 OM 803 us – Edition 3.7 * * 803b540.fm
Maintenance
5.16 Maintenance plan (overview)
Work description
For servicing and maintenance on the attachment, please refer to the operation and maintenance manual of
the attachment manufacturer.
Maintenance plan/operating hours (o/h)
Maintenance
(once a day)
Every 50 o/h
Every 250 o/h
Every 500 o/h
Every 1000 o/h
once a year
Every 2000 o/h
Customer
Wacker Neuson
service center
Fluid and filter changes ( ):
Perform the following oil and filter changes (check oil levels after test run):
• Engine oil
1
●● ●
• Engine oil filter
2
●● ●
• Fuel filter
3
●● ●
• Water separator
●●
• Coolant
●●
• Hydraulic oil filter insert
4
●● ●
• Hydraulic oil
5
●● ●
• Drain condensation water from the hydraulic oil reservoir (from serial no. AH02272)
●●
• Air filter element (up to serial no. AI00875)
●●
• Air filter element according to dirt indicator (from serial no. AI00876)
6
●●
Inspection work ( ):
Check the following material. Refill if necessary:
• Engine oil
●●
• Engine coolant
●●
• Fuel
●●
• Hydraulic oil
●●
Check the function of the pedals (up to serial no. AI00975)
• Clean, lubricate or repair the pedals
●●
Maintenance
To Next Page
Loading...
