OM 803 us – Edition 3.7 * * 803b540.fm 5-39
Maintenance
Check the function of the pedals, they must flip back automatically (from serial no. AI00976)
• Clean, lubricate or repair the pedals, check the torsion springs
●●
Clean water ducts
7
●●
Check radiator for engine and hydraulic oil for dirt. Clean if necessary
●●
Check cooling systems and hoses for leaks and pressure (visual check)
●●
Air filter (damage)
●●
Remove dust from dust valve
●●
Prefilter with water separator: drain water
●●
• Clean
●●
Check V-belt condition and tension
●●
Replace the V-belt
●●
Check the exhaust system for damage and condition
●●
Check the rollbar for damage
●●
Check valve clearance. Adjust if necessary
●●
Clean and adjust the fuel injection pump
8
●●
Check and adjust the injection pressure of the injection nozzles, clean the injection needles/nozzles
●●
Check and adjust injection time
9
●●
Empty the fuel tank and check for dirt ●
●
5.16 Maintenance plan (overview)
Work description
For servicing and maintenance on the attachment, please refer to the operation and maintenance manual of
the attachment manufacturer.
Maintenance plan/operating hours (o/h)
Maintenance
(once a day)
Every 50 o/h
Every 250 o/h
Every 500 o/h
Every 1000 o/h
once a year
Every 2000 o/h
Customer
Wacker Neuson
service center
To Next Page
Loading...
