5-40 OM 803 us – Edition 3.7 * * 803b540.fm
Maintenance
Check battery electrolyte. Add distilled water if necessary
●● ●
Check alternator, starter and electric connections, bearing play and function
●●
Check preheating system and electric connections
●●
Pressure check of primary pressure limiting valves
10
●● ●
Check tracks for cracks and cuts
●●
Check track tension. Retighten if necessary
●●
Check bearing play of tread rollers, track carrier rollers, front idlers
●●
Check piston rods for damage
●●
Check the threaded fittings of the safety devices (for example rollbar, etc.) for tightness
●●
Check the threaded fittings for tightness
●●
Check pin lock
●●
Check line fixtures
●●
Check indicator lights for correct function
●●
Couplings, dirt pile-up on hydraulic system dust caps
●●
Check insulating mats in engine compartment for damage/condition
●●
Check labels and Operator’s Manual for completeness and condition
●●
Lights and acoustic warning system
11
●●
Check lubricant on live ring
12
●● ●
Check gearing of swivel unit pinion
●●
Lubrication service ( ):
Lubricate the following assemblies/components – see Maintenance label on page 5-43:
5.16 Maintenance plan (overview)
Work description
For servicing and maintenance on the attachment, please refer to the operation and maintenance manual of
the attachment manufacturer.
Maintenance plan/operating hours (o/h)
Maintenance
(once a day)
Every 50 o/h
Every 250 o/h
Every 500 o/h
Every 1000 o/h
once a year
Every 2000 o/h
Customer
Wacker Neuson
service center
To Next Page
Loading...
