OM 803 us – Edition 3.7 * 803b110.fm 1-17
Introduction
Meaning
The reservoir is hot and under pressure.
• Allow the fluids to cool down!
Carefully and slowly open the cover only after the reservoir has cooled down, to release
the pressure.
Wear suitable protective clothing and goggles to open the cover.
Position
On the hydraulic oil reservoir
Meaning
Burn hazard. Hot surface. Do not touch.
• Do not touch surfaces, wait for parts to cool down.
Position
In the engine compartment
Meaning
Attention! Read and understand the Operator’s Manual before starting the machine!
The machine may be put into operation only if you read, understand and observe the
Operator’s Manual.
Position
At the front on the engine cover (standard).
On the left on the rollbar (option).
Meaning (up to serial no. AI00824)
Crushing hazard.
• Only operate the machine from the operator’s seat.
• Machine operation is only allowed if the rollbar is raised and locked, and if the seat belt
is fastened.
• Machine operation with the rollbar lowered is prohibited.
Operate within stability limits of machine to avoid tipping over.
• Always work ensuring machine stability, do not overload the machine and use only
attachments that have been released by the manufacturer. Always work on firm
ground. Follow the instructions given in the Operator’s Manual.
Position
At the front on the engine cover (standard).
On the left on the rollbar (option).
Fig. 26: Reservoir under pressure
Fig. 28: Read and understand the Operator’s Manual
To Next Page
Loading...
