BA 50Z3/6003 en – Edition 4.3 * 5003b330.fm 3-47
Operation
• Insert buckle latch A into buckle B with an audible click (pull test).
• Tighten the seat belt by pulling at its end.
➥ The seat belt must be tightly in place over the hips.
Unfastening the seat belt:
☞ Unfasten seat belt S as follows:
• Hold the seat belt.
• Press switch C on buckle B.
➥ Latch A is released by spring pressure.
☞ Roll up the seat belt slowly.
3.28 Mirrors (option)
Safety instructions
Adjust all mirrors as indicated in the Operator’s Manual.
Risk of injury.
☞ Use safety-oriented ladders and work platforms for adjustment work on the
machine.
☞ Never use machine parts or attachments/superstructures as a climbing aid.
☞ Do not adjust the mirrors when driving the machine.
☞ Immediately replace damaged or broken mirrors.
☞ Additional equipment or attachments must not impair visibility.
In spite of the visual aids (mirrors), not the entire area around the machine can
be seen.
Risk of accidents.
☞ Follow the safety instructions.
☞ Check the surroundings constantly.
☞ Put the machine into operation/drive it only if visibility is sufficient (have
another person guide you if necessary).
Fig. 107: Fastening the seat belt
A
B
B
A
C
Fig. 108: Unfastening the seat belt
S
To Next Page
Loading...
