BA 50Z3/6003 en – Edition 4.3 * 5003b530.fm 5-41
Maintenance
We recommend using the following aids to clean the cab:
• Broom
• Vacuum cleaner
• Damp cloth
•Brush
• Water with mild soap solution
Cleaning the seat belt
• Clean the seat belt (which remains fitted in the machine) only with a mild soap solution;
do not use chemical agents as they can destroy the fabric.
Exterior of the machine
The following articles are generally suitable:
• High-pressure cleaner
• Steam jet
Engine compartment
Clean the engine at engine standstill only –
Risk of injury.
☞ Stop the engine before cleaning.
When cleaning the engine with a water or steam jet
☞ The engine must be cold
☞ and do not point the jet directly at electric sensors such as the oil pressure
switch.
The humidity penetrating any such sensors causes them to fail and leads to
engine damage.
Threaded fittings and attachments
All threaded fittings must be checked regularly for tightness, even if they are not listed in
the maintenance schedules.
☞ Engine fastening screws.
☞ Fastening screws on the hydraulic system.
☞ Line, bucket teeth and pin fastenings on the attachment
Retighten loose connections immediately. Contact an authorized workshop if necessary.
Pivots and hinges
All mechanical pivot points on the machine (door hinges, joints, for example) and fittings
(door arresters, for example) must be lubricated regularly, even if they are not listed in the
lubrication plan.
To Next Page
Loading...
