BA 50Z3/6003 en – Edition 4.3 * 5003b330.fm 3-19
Operation
3.10 Before starting the engine
All controls must be within easy reach. You must be able to move the drive levers
to their limit positions.
Operate the machine only on adequately ventilated premises. Ensure sufficient
ventilation on enclosed premises.
☞ Adjust seat position and rearview mirror – see chapter 3.23 Seat (50Z3) on page 3-37.
☞ Fasten your seat belt – see chapter 3.26 Seat belt on page 3-45.
☞ Fold the left-hand control lever base down.
☞ Check whether all levers and pedals are in neutral position.
☞ Move the throttle to the centre position (between minimum and maximum) if the engine
is cold.
☞ Remove dirt (for example mud, snow, ice, etc.) from all windows, mirrors, lights, foot-
holds, drive pedals and control levers.
Operation
To Next Page
Loading...
