3-78 BA 50Z3/6003 en – Edition 4.3 * * 5003b330.fm
Operation
Shatter protection (50Z3 option)
Danger of piercing/penetration by objects from the front!
Causes severe injury or death.
☞ A shatter protection must be installed on a canopy version if an attachment
(a hammer, for example) causes fragments to fly around. This shatter pro-
tection takes over the function of a front window.
☞ Pay attention to the restricted work range (see fig. 161 and 162).
☞ Machine operation is prohibited without a shatter protection.
Risk of accidents in conditions of restricted visibility due to rain,
snowfall, dust etc.!
Causes severe injury or death.
☞ Stop work immediately.
The shatter protection (canopy option) protects the driver against fragments from
the front.
• The operator must ensure that the danger situation is evaluated and that the
national regulations are observed.
• The operator must ensure that only work is performed that does not require any
higher protection.
• Accidents cannot be fully avoided despite equipping a machine with protective
structures.
Do not use brushes, steel wool or other abrasive cleaners for cleaning the polycar-
bonate disc. Do not wipe dust in a dry state.
Only an authorized workshop may install the shatter protection for the first time.
To Next Page
Loading...
Need help?
General
