6-36 BA 50Z3/6003 en – Edition 4.3 * * 5003b610.fm
Specifications
Applications with lifting gear
The lowest value in table A (A = boom reach from live ring centre) is the weight the
machine is allowed to raise and with which it can perform a 360° rotation with the upper
carriage without tipping over. If an attachment (hydraulic quickhitch or Powertilt console) is
installed, the weight of the attachment must be subtracted from the value that has been
determined before.
Exchangeable equipment (backhoe bucket, grab, hammer, for example) installed on the
boom must be removed before a lifting gear application.
Example for determining weight:
To Next Page
Loading...
Need help?
General
