5-50 BA 50Z3/6003 en – Edition 4.3 * * 5003b530.fm
Maintenance
Lubrication points of control lever base (from serial no. AJ02777)
☞ Raise the control lever base.
☞ Spray fluid grease onto guide lever C.
☞ Spray fluid grease on both sides of double spring D.
Spray fluid grease onto the lubrication points once a month (250 s/h).
In the area of the moving parts of the control lever base –
Crushing hazard.
☞ Stay clear (extremities, clothing) of the moving parts.
VDS lubrication points (option)
Apply grease to lubrication points A once a week.
Fig. 323: Guide lever and double spring
C
D
Fig. 324: VDS lubrication points
A
A
To Next Page
Loading...
