3-108 BA 50Z3/6003 en – Edition 4.3 * * 5003b340.fm
Operation
Setting down an attachment
Set down attachments only on surfaces that allow to pick up them without any
problems later on.
Risk of injury.
☞ Do not set down the attachment on soft, sloping, slippery surfaces or near
edges.
☞ Lower the attachment to about 5 – 10 cm (2 – 4 in) above the ground.
☞ Actuate switch 50.
➥ The buzzer sounds.
☞ Press and hold foot-operated tip switch 32.
☞ Operate the stabilizer blade (raise as far as it will go).
➥ The quickhitch opens and unhitches the attachment.
50
Fig. 219: Easy Lock switch (up to serial no. AH02781)
Fig. 220: Easy Lock switch (from serial no. AJ02777)
50
Fig. 221: Foot-operated tip switch and stabilizer blade
lever (up to serial no. AH02781)
32
Fig. 222: Foot-operated tip switch and stabilizer blade lever
(from serial no. AJ02777)
32
To Next Page
Loading...
