BA 50Z3/6003 en – Edition 4.3 * * 5003b540.fm 5-57
Maintenance
5.22 Maintenance plan (overview)
Work description
For service and maintenance work on the attachment, please refer to the operation and maintenance
manual of the attachment manufacturer as well.
Maintenance plan/service hours (s/h)
Maintenance work
(once a day)
Every 50 s/h
Every 250 s/h
Every 500 s/h
Every 1000 s/h
once a year
Every 1500 s/h
Every 2000 s/h
Customer
Authorized
workshop
Fluid and filter changes ( ):
Perform the following oil and filter changes (check oil levels after test run):
• Engine oil
1
●
●●
• Engine oil filter
2
●● ●
• Fuel filter
3
●● ●
• Air filter element as indicated by indicator light
4
●
●
• Coolant
●●
• Hydraulic oil filter insert
5
●● ●
• Hydraulic oil
●●
• Hydraulic oil tank breather
●●
• Drain the condensation water from the hydraulic oil tank
●●
• Replace cab air filter for heating and air conditioning
●●
• Drive gearbox oil
6
●● ●
Inspection work ( ):
Check the following material. Refill if necessary:
• Engine oil
●●
• Engine coolant
●●
• Hydraulic oil
●●
• Fuel
●●
• Drive gearbox oil
●●
Clean water ducts ●
●
Check pedal function ●●
Check engine/hydraulic oil radiator and air conditioning for dirt. Clean if necessary
●●
Maintenance
To Next Page
Loading...
Need help?
General
