BA 50Z3/6003 en – Edition 4.3 * * 5003b540.fm 5-61
Maintenance
• Heating function
●
●
• Upper carriage Kippmatik tilting mechanism (VDS)
●●
• Hydraulic quickhitch system (option) (lock)
●●
• Check the Powertilt (option)
●●
Leakage check ( ):
Check for tightness, leaks and chafing: pipes, flexible lines and threaded fittings of the following assemblies and components. Rectify if necessary:
• Visual check
●●
☞ Engine, hydraulic system and components
●●
☞ Cooling and heating circuit
●●
☞ Travelling drive
●●
☞ Air conditioning
●●
☞ Hydraulic quickhitch system (option) (hoses, valve)
●●
1. Drain engine oil the first time after 50 s/h, then every 500 s/h
2. Replace the engine oil filter the first time after 50 s/h, then every 500 s/h
3. Replace the fuel filter the first time after 50 s/h, then every 500 s/h
4. According to the dirt indicator, replace every 500 s/h at the latest. (Replace after 50 s/h when in extensive use in environments with acidic air, such as acid production facilities, steel and aluminium mills, chemical plants and other nonferrous-metal plants)
5. Replace the hydraulic oil filter insert the first time after 50 s/h, then every 500 s/h
6. Drain the gearbox oil the first time after 50 s/h, then every 1000 s/h
7. Check the first time after 50 s/h, then every 500 s/h.
8. Check once a week.
9. Check once a week. Rinse the system to remove dirt. Repeat the procedure in the opposite flow direction.
10. Switch on once every week.
11. Switch on once every week.
12. Switch on once every week
13. Replace the compressor oil every other 1500 s/h servicing.
5.22 Maintenance plan (overview)
Work description
For service and maintenance work on the attachment, please refer to the operation and maintenance
manual of the attachment manufacturer as well.
Maintenance plan/service hours (s/h)
Maintenance work
(once a day)
Every 50 s/h
Every 250 s/h
Every 500 s/h
Every 1000 s/h
once a year
Every 1500 s/h
Every 2000 s/h
Customer
Authorized
workshop
To Next Page
Loading...
Need help?
General
