10
VERSION 10/2018 ORDER NUMBER DOC 2339321
.
1.5 ABBREVIATIONS
Abbreviations in the text
Number of pieces TC 1.4404 TwinControl for acidic hardeners
Position Protective coating: heavy duty corrosion protection
Marking in the spare parts lists HP High pressure 4-50 MPa; 40-500 bar; 580-7,250 psi
Order no. Order number HPP Highest pressure over 50 MPa; 500 bar; 7,250 psi
Double stroke ESTA Electrostatically charged device
Nominal diameter Materials
Two components Stainless steel
Fluorine elastomer
GFB Gun ush box
Polyamide
TwinControl Polytetrauorethylene
Abbreviations in the text and control unit
A component Mixing ratio
B component Job total
Flushing agent Pot life
Flushing on A-side Flow rate / pot life
Flushing on B side -- --
1.6 TERMINOLOGY FOR THE PURPOSE OF THIS MANUAL
Cleaning
Cleaning Manual cleaning of devices and device parts with cleaning agent.
Flushing Internal ushing of paint-wetted parts with ushing agent.
Personnel qualications
Trained person Is instructed in the tasks assigned to him/her, the potential risks
associated with improper behavior as well as the necessary
protective devices and measures.
Electrically trained
person
Is instructed by an electrician about the tasks assigned to him/her,
the potential risks associated with improper behavior as well as
the necessary protective devices and measures.
Electrician Can assess the work assigned to him/her and detect possible
hazards based on his/her technical training, knowledge and
experience in relevant provisions.
Skilled person in
accordance with
TRBS 1203
(2010/Revision 2012)
A person who, based on his/her technical training, experience and
recent vocational experience, has sucient technical knowledge
in the areas of explosion protection, protection from pressure
hazards and electric hazards (if applicable) and is familiar with
the relevant and generally accepted rules of technology so that
he/she can inspect and assess the status of devices and coating
systems based on workplace safety.
To Next Page
Loading...
