WAGNER TwinControl - PRINCIPLE DIAGRAM; CONTROLLER 1; 9; 10 FOR PUMPS 5-60 TO 35-150

35
VERSION 10/2018 ORDER NUMBER DOC 2339321
.
5.7 PRINCIPLE DIAGRAM
5.7.1 CONTROLLER 1 / 9 / 10 FOR PUMPS 560 TO 35150
Use with A-pumps 5-60, 10-70, 28-40, 15-70, 15-150, 21-110, 35-70, 35-150 with single-acting
product valves with spring reset.
Controllers 1 / 9 / 10 for turbine: The turbine generates the current from compressed air.
Controller 1 for cable: Controller with electrical mains connection.
For dierences in controllers 1, 9 and 10: see Chapter 5.6
AIS
P1
A
B
S
B_02764
1.0:1
1.0:1
1.0:1
1.0:1
TwinControl
Controllers 1 / 9 / 10
Turbine
TwinControl
Controller 1
Cable
or
AIS only with
controller 9 or 10