WAGNER TwinControl - ASSEMBLY AND COMMISSIONING; TRAINING OF ASSEMBLY;COMMISSIONING PERSONNEL

49
VERSION 10/2018 ORDER NUMBER DOC 2339321
.
6 ASSEMBLY AND COMMISSIONING
6.1 TRAINING OF ASSEMBLY/COMMISSIONING PERSONNEL
The assembly and commissioning personnel must have the technical skills to safely
commission the device.
When assembling, commissioning and carrying out all work, read and follow the
operating manuals and safety regulations for the additionally required system
components.
A skilled person must check to ensure that the device is in a reliable state after it is installed
and commissioned.
6.2 STORAGE AND INSTALLATION CONDITIONS
Until the point of assembly, the device must be stored in a dry location, free from vibrations
and with a minimum of dust. The device must be stored in closed rooms.
For ambient temperature and air humidity, see Chapter 5.5.4.
Long-term Storage
See Chapter 9.1.6.