WAGNER TwinControl - Identification for Devices with a Mains Power Supply

15
VERSION 10/2018 ORDER NUMBER DOC 2339321
.
3.2 IDENTIFICATION FOR DEVICES WITH A MAINS POWER SUPPLY
, cable with mains power supply
The system with mains power supply (cable) must not be operated in potentially explosive
areas (zone 0, 1, 2).
The remote control (accessory) may not be used along with a system with a mains power
supply (cable) in potentially explosive areas. The same applies to the 2A switchbox (accessory).
Device type: TwinControl
Manufacturer: Wagner International AG
9450 Altstätten
Switzerland
Identication:
CE mark (European Communities)
Identication and special notices regarding pumps
See operating manuals for pumps