WAGNER TwinControl - Extension Cables; TC VM5000 Automatic Electrostatic System; GFB Connection Kit

122
VERSION 10/2018 ORDER NUMBER DOC 2339321
.
13.12 EXTENSION CABLES
Order no. Designation
2320609 Controller connecting set for
TwinControl approx. 5m;
16.4ft. The extension set allows
the control unit to be tted
separately from the system.
The set can be used for control
units of type 1 and 2.
B
A
SET
TwinControl
B
B
A
A
Set
B_03713
2316481 Extension cable for stroke
measurement 5m; 16.4ft.
Can be used to extend the
potentiometer for the stroke
measurement on TwinControl
systems.
Maximum extension 5m; 16.4ft.
B_03712
13.13 TC VM5000 AUTOMATIC ELECTROSTATIC SYSTEM
Order no. Designation
2334530 Automatic electrostatic system
The TC VM5000 automatic electrostatic system set serves as an additional safety device for the
safe use of the TwinControl 2K system with a GM5000 electrostatic gun.
Prerequisite: Controller 1, 2, 3, 9 or 10
13.14 GFB CONNECTION KIT
Order no. Designation
2302563 Connection kit for gun ush box (GFB)
B_04525
Installation in control unit 1, 2, 9 or 10. The kit is
already installed in controllers 3 and 8.
The GFB connection kit is used as a link between
the TwinControl system and a gun ush box.