WAGNER TwinControl - Additional Parts for Second Paint (2 A)

121
VERSION 10/2018 ORDER NUMBER DOC 2339321
.
13.11 ADDITIONAL PARTS FOR SECOND PAINT 2A
For requirements, see Chapter8.15.
If heaters are used, the second A-pump needs a separate bracket.
(Instead of the 2A extension)
Order no. Designation
2340959 Switchbox 2A-HM1 (TC) with stroke measurement 1
B_04561
2340820 Switchbox 2A-HM2 (TC) with stroke measurement 2
Without pump, Spraypack and additional parts.
2339639 Extension 2A
Lateral extension for small frame for assembling
of second A-pump. For systems without a heater.
B_04510
2341205 Expansion set 2A-HM1 (TC) for TwinControl
A-pumps 28-40, 15-70, 35-70
B_04560
2340707 Expansion set 2A-HM1-ND (TC) for TwinControl
A-pumps 5-60, 10-70
2341006 Expansion set 2A-HM2 (TC) for TwinControl
A-pumps 15-150, 21-110, 35-150
Extension 2A (for systems without a heater),
switchbox 2A incl. stroke measurement, inline lter,
hoses and ttings.
Without pump and Spraypack.
2344231 Expansion set 2A-HM2 (TC) for TwinControl
A-pumps 48-110, 8-300, 18-300, 3-600, 8-600
Extension 2A (for systems without a heater),
switchbox 2A incl. stroke measurement,
high-pressure lter, hoses and ttings.
Without pump and Spraypack.
B_06283
2348739 Expansion set 2A-HM2 (TC) for TwinControl
A-pumps 75-150
Extension 2A for large frames (for systems without
a heater), switchbox 2A incl. stroke measurement,
high-pressure lter, hoses and ttings.
Without pump and Spraypack.
B_06284