WAGNER TwinControl - Table of Contents; Twincontrol 2; Twincontrol

3
VERSION 10/2018 ORDER NUMBER DOC 2339321
.
Table of Contents
1 ABOUT THESE INSTRUCTIONS 7
1.1 Preface 7
1.2 Warnings, Notices and Symbols in these Instructions 7
1.3 Languages 8
1.3.1 Operating Manuals for the Individual Components 8
1.4 TwinControl CD 9
1.5 Abbreviations 10
1.6 Terminology for the Purpose of this Manual 10
2 CORRECT USE 11
2.1 Device Types 11
2.2 Type of Use 11
2.3 For Use in Potentially Explosive Areas 11
2.4 Processible Working Materials 12
2.5 Misuse 12
3 IDENTIFICATION 13
3.1 Explosion-Proof Marking for Devices with Turbines 13
3.1.1 Use in Areas Subject to Explosion Hazards 14
3.2 Identication for Devices with a Mains Power Supply 15
3.3 Type Plates 16
4 BASIC SAFETY INSTRUCTIONS 17
4.1 Safety Instructions for the Operator 17
4.1.1 Electrical Devices and Equipment 17
4.1.2 A Safe Work Environment 17
4.1.3 Personnel Qualications 18
4.2 Safety Instructions for the Personnel 18
4.2.1 Personal Safety Equipment 19
4.2.2 Safe Handling of WAGNER Spray Devices 19
4.2.3 Grounding the Unit 20
4.2.4 Product Hoses 20
4.2.5 Cleaning and Flushing 21
4.2.6 Touching Hot Surfaces 22
4.2.7 Maintenance and Repair 22
4.2.8 Protective and Monitoring Equipment 22
5 DESCRIPTION 23
5.1 Components 23
5.1.1 TwinControl Finishing and Protective Coating 24
5.2 Mode of Operation 24
5.3 Protective and Monitoring Equipment 24
5.4 Included Items 25
5.5 Technical Data 25
5.5.1 Materials of Paint-wetted Parts 25
5.5.2 Control Units with Turbines 26
5.5.3 Control Units with Mains Power Supply (Cable) 28
5.5.4 Entire System 28
5.5.5 Pumps 30
5.5.6 Dimensions 31
5.5.7 Weights 33