EasyManua.ls Logo

WAGNER TwinControl - Page 108

WAGNER TwinControl
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
108
VERSION 10/2018 ORDER NUMBER DOC 2339321
.
Software version V 4.0x / 4.1x / 4.2x
Code Meaning Cause Fault rectication
26 Sensor A reversal
points
Stroke sensor A problem with
reversal points.
Calibrate A. Replace stroke sensor if
necessary.
27 Sensor B reversal
points
Stroke sensor B problem with
reversal points.
Calibrate B. Replace stroke sensor if
necessary.
30 Downward speed A Pump A sags in downward stroke,
pump cavitating.
Check product supply.
31 Downward speed B Pump B sags in downward stroke,
pump cavitating.
Check product supply.
32 Upward speed A Pump A sags in upward stroke,
pump cavitating.
Check product supply. Leak check,
check piston valve.
33 Upward speed B Pump B sags in upward stroke,
pump cavitating.
Check product supply. Leak check,
check piston valve.
40 Alarm password The software is not enabled. Enter software password.
WAGNER AG password
(only possible on PC).
41 Incorrectly adjusted
air pressure
Turbine speed too low. Check turbine. Adjust air pressure
(WAGNER technician).
42 Incorrectly adjusted
air pressure
Turbine speed too high. Check turbine. Adjust air pressure
(WAGNER technician).
61 Warning leakage A up The A uid section has a slight leak
in the upward stroke.
Check circulation valve. / Schedule an
inspection of the A uid section.
62 Warning leakage A
down
The A uid section has a slight leak
in the downward stroke.
Check circulation valve. / Schedule an
inspection of the A uid section.
63 Alarm leakage A up The A uid section has a large leak
in the upward stroke.
Check circulation valve. / Schedule
inspection of the A uid section.
64 Alarm leakage A
down
The leak in the A-pump in the
downward stroke exceeds the error
limit.
Check circulation valve. / Schedule
inspection of the A uid section.
65 Alarm leakage B up The B uid section has a slight leak
in the upward stroke.
Check circulation valve. / Schedule an
inspection of the B uid section.
66 Alarm leakage B down The B uid section has a slight leak
in the downward stroke.
Check circulation valve. / Schedule an
inspection of the B uid section.
67 Alarm leakage B up The B uid section has a large leak
in the upward stroke.
Check circulation valve. / Schedule
inspection of the B uid section.
68 Alarm leakage B down The leak in the B pump in the
downward stroke exceeds the error
limit.
Check circulation valve. / Schedule
inspection of the B uid section.

Table of Contents

Other manuals for WAGNER TwinControl

Related product manuals