WAGNER TwinControl - Page 29

29
VERSION 10/2018 ORDER NUMBER DOC 2339321
.
Inputs / outputs and mixing ratio Unit for A-pump
EvoMotion
5-60
Puma
28-40
Puma
15-70
Puma
15-150
Puma
21-110
Puma
8-300
Puma
3-600
TwinControl air inlet inch G 1/2"
Mixer product outlet inch NPS 1/4 NPS 3/8
A/B mixing ratio volume 0.1:1–20:1 0.1:1–10:1
Dosing precision *
± 2
Inputs / outputs and mixing ratio Unit for A-pump
Leopard
35-70
Leopard
35-150
Leopard
48-110
Leopard
18-300
Leopard
8-600
Jaguar
75-150
Jaguar
55-200
Jaguar
38-300
Tiger
72-300
TwinControl air inlet inch G 1/2" G 1"
Mixer product outlet inch NPS 1/4 NPS 3/8
A/B mixing ratio volume 0.1:1–20:1 0.1:1–10:1
Dosing precision *
± 2
* The target mixing ratio at a precision level of ± 2% is achieved after each completed cycle
(injection of hardener into base lacquer).
Precision of
2% is achieved under the following conditions:
– Proper use of the system in compliance with the operating manuals.
–
Correct calibration and function of volume measuring sensors in accordance with Chapter 6.6.4.
–
Correct adjustment of the compression ratio between the base lacquer and hardener in accordance
with Chapter 8.7.
– Correct adjustment of the hardener dosing valve stroke, or use of the AIS.
– Exact setting of the system to suit the product used, in accordance with the processing specications
stipulated by the product manufacturer.
– For a homogenous density of the base lacquer and hardener it might be necessary to make respective
preparations in tanks, for example by applying an agitator.
– Correct use of the system in accordance with the specic operating conditions such as the permitted
product and ambient temperature, suitable viscosity and ow rate.
–
Regular maintenance has to be carried out by a qualied person (e.g., WAGNER service technician) in
accordance with Chapter 9.2.