WAGNER TwinControl - Page 76

76
VERSION 10/2018 ORDER NUMBER DOC 2339321
.
Display in the display unit
When the programmed ushing program is called up by pressing the [Flush] push button
on the control unit and is running, each of the individual steps is shown briey on the
display.
Examples of ushing programs
for EvoMotion 5-60
Step F Action Value Unit Remarks
Product A (press 10cc of A-product into spray hose)
Product B (press 10cc of B-product into spray hose)
Flushing A (press mixed product out of the spray hose)
Flushing A (solvent for solvent-air ushing)
Flushing B (air for solvent-air ushing)
Flushing A (ll spray hose with ushing agent again)
Start of repetition from step 4
End of repetition at step 5
Number of repetitions from step 4 to 5 = 10x
for Puma 28-40
Step F Action Value Unit Remarks
Product A (press 10cc of A-product into spray hose)
Product B (press 10cc of B-product into spray hose)
Flushing A (ush product hose with 200 cc)
for Leopard 48-110
Step F Action Value Unit Remarks
Product A
Product B
Flushing B (ush 200 cc on B-side)
Flushing A (ush 200 cc on A-side)