WAGO 750 Series System Manual

Serie 750, 753System Features
16 System manual | Version: 3.0.2
Example View of the I/O Module 753 Series (Pluggable Connector)
1
2
2
3
4
5
6
7
8
9
10
11
12
13
Figure7: I/O module 753 Series (example)
1 Slot for WSB (optional)
2 Data contacts
8Data Contacts [}20]
3 Indicators & Product Manual
4 Access to open the associated CAGE CLAMP
®
con-
nection
8Connect Conductor to CAGE CLAMP® [}50]
5 CAGE CLAMP
®
connection
6 Unlocking tab for the pluggable connector
8Removing the I/O Module [}46]
7 Power jumper contact (spring)
8Power Jumper Contacts [}21]
8 Release tab for the I/O module
8Removing the I/O Module [}46]
9 Fastening tab for cable ties
10 Test slot for associated CAGE CLAMP
®
connection
11 Power jumper contact (blade)
8Power Jumper Contacts [}21]
12 Coding Key
8Coding Keys [}22]
13 Item number
8Product Identification [}17]

WAGO 750 Series Specifications

General

Protection Class	IP20
Bus Couplers	PROFIBUS, CANopen, Ethernet
Modules	Digital Input, Digital Output, Analog Input, Analog Output
Mounting	DIN rail mounting
Voltage Supply	24 V DC (typical)
Communication Protocol	Depends on the bus coupler (e.g., PROFIBUS, CANopen, DeviceNet, Ethernet)
Digital Input Channels	Varies by module (e.g., 8, 16 channels)
Digital Output Channels	Varies by module (e.g., 8, 16 channels)
Analog Input Channels	Varies by module (e.g., 2, 4, 8 channels)
Analog Output Channels	1, 2, 4 channels (depending on module)
Width	12 mm, 24 mm (typical module widths)
Number of Channels	Varies by module type
Current Consumption per Channel	Varies by module type