WAGO 750 Series System Manual

Serie 750, 753System Features
26 System manual | Version: 3.0.2
Depending on the application area, the following may also be needed:
• Filter modules
• Distance modules
The distance modules are used to realize the increased requirements for clearances
and creepage distances.
• Voltage buffers
– UPS modules
– Capacitive buffer modules
3.3 Technical Data
Note
Read product manual!
Product-specific information for the Technical data of the products, see the respective &
Product Manual.
3.4 Standards
3.4.1 Approvals
Note
Read product manual!
You can find Product-specific information on the topic Approvals in the respective &
Product Manual.
3.4.2 Guidelines, Standards and Recommendations
Note
Read product manual!
You can find Product-specific information on the topic Guidelines, Standards and Recom-
mendations in the respective & Product Manual.
3.4.3 Product-Related Environmental Protection
Product-related environmental protection plays a significant role in WAGO's sustainable
environmental management. We place high priority on ensuring adherence to substance
prohibitions/limitations worldwide.

WAGO 750 Series Specifications

General

Protection Class	IP20
Bus Couplers	PROFIBUS, CANopen, Ethernet
Modules	Digital Input, Digital Output, Analog Input, Analog Output
Mounting	DIN rail mounting
Voltage Supply	24 V DC (typical)
Communication Protocol	Depends on the bus coupler (e.g., PROFIBUS, CANopen, DeviceNet, Ethernet)
Digital Input Channels	Varies by module (e.g., 8, 16 channels)
Digital Output Channels	Varies by module (e.g., 8, 16 channels)
Analog Input Channels	Varies by module (e.g., 2, 4, 8 channels)
Analog Output Channels	1, 2, 4 channels (depending on module)
Width	12 mm, 24 mm (typical module widths)
Number of Channels	Varies by module type
Current Consumption per Channel	Varies by module type