WAGO 750 Series System Manual

Serie 750, 753 Planning
System manual | Version: 3.0.2 39
2 Bus supply module, 24VDC (750-602) or
bus supply module, 24VDC, with fuse (750-601) or
bus supply module, 24VDC, with fuse and diagnostics (750-610)
3 Filter module, 24VDC, HI GF (750-624/020-002) or
filter module, 24VDC, HI (750-624/020-000)
4 Bus supply module, 24VDC, Exi, with diagnostics (750-606) or
bus supply module, 24VDC, Exi (750-625/000-001)
5 Exi I/O modules
Power Supply Concept for Marine Applications in Exi Zone, Class B
To use intrinsically safe modules Class B marine applications (all areas, except bridge
and open deck), the filter module 750-626/xxx-xxx must be used in conjunction with the
Ex i supply module.
4
U
S
U
F1
U
F2
3
1
2
Figure20: Power Supply Concept for Marine Applications in Exi Zone – Class B
1 Filter module, 24VDC, HI GF (750-626/020-002) or
filter module, 24VDC, HI (750-626/020-000)
2 Filter module, 24VDC, HI GF (750-626/020-002) or
filter module, 24VDC, HI (750-626/020-000)
3 Bus supply module, 24VDC, Exi, with diagnostics (750-606) or
bus supply module, 24VDC, Exi (750-625/000-001)
4 Exi I/O modules
4.6 Examples and Aids
4.6.1 Aids
WAGO can help you with a wide range of useful products and software solutions. The
aids for project planning include:

WAGO 750 Series Specifications

General

Protection Class	IP20
Bus Couplers	PROFIBUS, CANopen, Ethernet
Modules	Digital Input, Digital Output, Analog Input, Analog Output
Mounting	DIN rail mounting
Voltage Supply	24 V DC (typical)
Communication Protocol	Depends on the bus coupler (e.g., PROFIBUS, CANopen, DeviceNet, Ethernet)
Digital Input Channels	Varies by module (e.g., 8, 16 channels)
Digital Output Channels	Varies by module (e.g., 8, 16 channels)
Analog Input Channels	Varies by module (e.g., 2, 4, 8 channels)
Analog Output Channels	1, 2, 4 channels (depending on module)
Width	12 mm, 24 mm (typical module widths)
Number of Channels	Varies by module type
Current Consumption per Channel	Varies by module type