WAGO 750 Series System Manual

Serie 750, 753 Appendix
System manual | Version: 3.0.2 53
Item No. Item Description Item Description
Shielding Elements
Shield Connection System, 790 Se-
ries
See product catalog
End Stops
249-1xx Screwless End Stop
Tool
210-722 Operating tool set Operating Tool Set with Partially In-
sulated Shaft
Test Probes
735-500 Test pin Ø 1mm; with solder connection for
test cable
859-500 Test pin Ø 1mm; with solder connection for
test cable
Coding Keys
753-150 Coding Keys Coding elements (753 Series)
Marking System
2009-145 Mini-WSB Inline On reel; stretchable 5-5.2 mm;
plain; snap-on type

WAGO 750 Series Specifications

General

Protection Class	IP20
Bus Couplers	PROFIBUS, CANopen, Ethernet
Modules	Digital Input, Digital Output, Analog Input, Analog Output
Mounting	DIN rail mounting
Voltage Supply	24 V DC (typical)
Communication Protocol	Depends on the bus coupler (e.g., PROFIBUS, CANopen, DeviceNet, Ethernet)
Digital Input Channels	Varies by module (e.g., 8, 16 channels)
Digital Output Channels	Varies by module (e.g., 8, 16 channels)
Analog Input Channels	Varies by module (e.g., 2, 4, 8 channels)
Analog Output Channels	1, 2, 4 channels (depending on module)
Width	12 mm, 24 mm (typical module widths)
Number of Channels	Varies by module type
Current Consumption per Channel	Varies by module type