9.2. Copying method
1. Press “copying key"/"ID card copying key”/"receipt copying key” on control panel.
2. Put the original document in automatic document feeder (ADF) (supporting common copying only) with right-side up or put it
on glass platform with right-side down (for the method on how to put original document, see 2.5.).
3. Set copying quantity with “direction or number key” according to types (99pieces at maximum).
4. Press “Startup key” for copying.
9.3. Copying cancel
Press “cancel key” on control panel if canceling copying.
9.4. Common copying setting
Change relevant setting with “copying setting menu” for better copying effect.
1. Press “copying key” on control panel and then press “OK key” to enter “copying setting” interface.
2. Press “direction key” to select options and then press “OK key” to enter setting interface.
3. Press “direction key to select option to be set and press “OK key” to set option.
• The image quality, intensity, resizing and paper setting can keep valid after options are set.
• For multipage, clone, poster, collated copy and manual dual-side setting, set recovery mode as default setting
after completing copying, switching panel key or restarting machine.
9.4.1. Image quality
Select corresponding image quality mode for original document used in order to improve copying effect.
There are 4 modes in total:
Automatic: default mode.
Text+ image: applicable to original text and image.
Image: applicable to original image.
Text: applicable to original text.
• The image quality mode supports “automatic” mode only after “poster” and “collated copy” are set.
9.4.2. Intensity
Adjust deep-light copying effect by setting intensity.
Intensity includes “manual” and “automatic adjustment”.
Manual adjustment: light dark
To Next Page
Loading...