3.1.2. Manual installation
Before installing the drive, you need to learn about printer model by printing printer information page out and check the product
name (please refer to Chapter 7.2 for printing methods).
3.1.2.1. Installation via USB connection
1. Connect the printer to computer via USB cable, power the printer and computer on.
2. Place the attached installation CD in the computer CD-ROM:
• Windows XP system: automatically run the installation procedure.
• Windows 7/Vista/Server 2008 system: Pop up "Autoplay" interface, click “Autorun.exe” to run the installation procedure.
• Windows 8 system: When the " DVD RW driver" window pops up from the right top corner of computer desktop, click
anywhere in the pop-up window, then click "Autorun.exe" to run the installation procedure.
• Windows 10 system: When the "DVD RW driver" window pops up from the right top corner of computer desktop, click
anywhere in the window, then click "Autorun.exe" to run the installation procedure.
• Some computers may be unable to auto play the CD beacase of system configuration. Please double click
"Computer" icon, find "DVD RW driver", then double click "DVD RW driver" to run the installation procedure.
3. Click on the "I agree" button on the right bottom corner after reading the license agreement and enter into driver installation
interface.
4. Click on the "Manual installation" at the bottom of driver installation interface, and enter into manual installation interface.
5. Please select installation language and printer model.
6. Select "Connect via USB" and click on "Install".
7. The software installs the driver automatically and the installation process may need some time. The duration is related to your
computer configuration, please wait patiently.
To Next Page
Loading...