Waves eMotion LV1 Classic User Guide | Chapter 3: Setup
Window
There may be situations where a device is not managed by any LV1 system. If a system outside of the current
group assigns the drive and claims manager status, the unowned device will reset to its default state and sharing
will be disabled. Old connections are lost, but new connections can still be established.
Should you get this prompt, check other connections to the system.
DEVICE MANAGEMENT OVERVIEW
• When a free device is assigned to a system’s inventory, the system becomes the manager of that device.
The device manager can configure any of the device’s parameters, such as clock settings, special device
parameters, gain, phantom power, and more. Only the device manager can update firmware.
• An unshared device can only be used by its owner. Other users on the network will not be able to assign
it.
• When sharing is enabled for a device, other systems can share its I/O channels. Clients have limited
control over many device parameters.
• The manager can permit remote preamp control of any or all devices with which it is sharing.
• For a client to set these manager-privileged parameters, it must claim manager status of the device by
going to the Manage Devices menu item. This does not affect any existing connections—it merely
changes the permissions.
To Next Page
Loading...