Waves eMotion LV1 Classic User Guide | Introduction
Safety and Precautions
•
Read these instructions.
•
Keep these instructions.
•
Heed all warnings.
•
Follow all instructions.
PROTECT YOUR MIXING CONSOLE (AND YOURSELF)
•
Do not block any console ventilation openings.
•
Do not block the console fan openings.
•
Do not block the openings on the bottom of the console.
•
Do not place the console on an unstable surface
•
Do not use the console near water. Do not spill liquids on the surface or into the openings.
•
Only plug the unit only into a grounded outlet that complies with local norms. Never defeat the
ground pin.
•
Avoid placing heavy objects on the control surface, scratching the surface or touchscreen with
sharp objects, or rough handling and vibration.
•
Cover the mixer when it is not being used for extended periods.
•
Unplug the console during lightning storms or when it is not being used for extended periods.
PAY ATTENTION TO THE OPERATING ENVIRONMENT
•
Do not place the console in direct sunlight
•
Do not install the console near any heat sources such as radiators, heat resistors, stoves, or other
equipment (including amplifiers) that produce heat.
•
If the equipment has been stored in sub-zero temperatures, allow time for it to reach normal
operating temperature before use at the venue. The recommended operating temperature for
eMotion LV1 Classic is 5 to 35 degrees Celsius.
To Next Page
Loading...