Waves eMotion LV1 Classic User Guide | Chapter 2: Channel
Window Window
8–C
HANNEL
I
NPUT
T
RIM
C
ONTROLS
Controls the channel’s pre-fader digital input level. Independent left and right
controls. Range: -INF to +10 dB
9–I
NPUT
M
ETER
P
EAK
I
NDICATOR
Displays the meter’s peak level. Red indicates that the user-defined clip threshold is exceeded. Click on the meter or
value box to clear. Meter behavior is set at Settings>U/I Settings. Here you’ll find:
• Metering point: pre- or post-digital trim
• Clip threshold indicator range: -9 to 0 dBFS
• Clip hold and peak hold range: 0 seconds to INF
10–M
ONO
/S
TEREO
M
ETER
Displays peak input level.
Range: -INF to 0 dBFS
11–F
ILTER
S
ECTION
Controls the HP/LP filter that has been assigned in the plugin rack.
Range (eMo F2): 16 Hz to 21357 Hz (values vary by plugin)
Refer to Channel window > Main Control Section > Controlling a Filter for more information.
12–I
NPUT
D
ELAY
Sets the user-defined delay between input sources. This is primarily used to align two or more microphones placed
at different distances from a sound source. Input delay is not associated with plugin/buss delay compensation.
Options:
On/Off, default: Off, Range: 0–250 samples
13–C
HANNEL
N
AME AND
S
EQUENCE
N
UMBER
The Channel ID Box displays the user-defined name of the selected channel, as well its channel index
number within the layer. This color-coding helps identify the selected channel, regardless of which layer is
currently displayed.
To Next Page
Loading...