Waves eMotion LV1 Classic User Guide | Chapter 1: Mixer
Window Window
O
RGANIZING
P
LUGINS IN THE
R
ACK
C
HANNEL
S
TRIP
M
ODE
Rack signal flow is from top to bottom of the rack. Some plugins are designed to work together in parallel without regard
for processing sequence. With these plugins, rack order is unimportant. Refer to the plugin’s user guide for details.
C
ONTROLLING
P
LUGINS
F
ROM THE
R
ACK
Single click: Opens the user interface of the plugin or external insert.
Single click + hold: Opens the Plugin menu.
Ctrl + Alt + click: Bypasses the plugin.
Ctrl + click: Disables and removes the plugin from the DSP processor.
Drag an icon off the left side of screen: Removes the plugin permanently.
M
OVING AND COPYING PLUGINS USING THEIR ICONS
Click + drag icon: Moves a plugin and its presets to another rack slot.
Alt + click + drag icon: Copies a plugin from one rack slot to another.
Drag a plugin to change its position in the rack. Drag to move a plugin or external insert to another channel or use
Alt+drag to copy. Latching Alt and Ctrl keys are located on the on-screen keyboard. Move a mono plugin module to a
stereo channel and the plugin becomes a stereo module. The mono plugin’s parameters will be applied to both sides of
the stereo module. If a stereo plugin is moved to a mono channel, then settings of the left stereo channel become the
mono parameters.
Do not add, remove, disable, or move a plugin when an audio dropout is not acceptable. These actions change the
structure of the plugin rack, which can result in a brief interruption. Bypassing a plugin or changing its parameters can be
done at any time.
Moving, copying, and controlling the plugin icons is executed on the touchscreen.
Take caution to avoid inadvertently touching an icon and changing its condition.
.
To Next Page
Loading...