Waves eMotion LV1 Classic User Guide | Chapter 2: Channel
Window Window
1.
Frequency Adjust Displays the center frequency of the band. Set gain by moving the graphic marker in the
display, clicking on the value box and sliding vertically, or entering a number in the box.
2.
Band On/Off: Toggles the band on or off. Depending on the band-linking setting, this affects the left channel, right channel, or
both channels.
3.
EQ Curve and Markers (L): Graphic display and control for the left channel.
4.
EQ Curve and Markers (R): Graphic display and control for the right channel.
5.
Left/Right Channel Linking: With certain EQ plugins, left and right channels can be controlled separately or
together.
If L+R is enabled, any change made to one channel will be applied to the other. If L+R is disabled, the left and
right channels can be controlled independently.
To Next Page
Loading...