Viewing the status of an IP camera
The camera status may be Online, Offline, and Incorrect account. For an online IP
camera, click to view live video.
Changing the channel name
Click the channel and enter a new channel name in the Name text field.
Setting a recording policy
Click the recording policy to be modified. The Recording Policy Configuration
interface is displayed. For how to set a recording policy, see 8.5.1 “Record Policy”.
Setting a stream
Click the stream to be modified. The Stream interface is displayed, as shown in Figure 4-4.
Figure 4-4 Stream page
Set stream parameters, and click OK. The parameter settings are applied to selected
IP cameras.
Setting a motion detection alarm
Click the motion detection information to be modified. The Motion Alarm page is
displayed. Set the arming time and detection zone when the motion detection alarm
function is enabled. For how to set a motion alarm detection, see 8.5.1 “Record
Policy”.
----End
To Next Page
Loading...
Need help?
General
