The easyTRX3 has immediately started with
a self-test and show the current status quo
as displayed.
In the example everything is “OK” and
“Anchor Alert” as well as “CPA Alert” are
not activated.
Please select the last topic of the list “Static
Data” to program your own vessel data
into the easyTRX3 unit.
For static data you will need your MMSI
number, you might already have from your
VHF radio.
If you don’t have any MMSI number yet,
you can apply for it at the German Federal
Network Agency. In chapter 1.4 you can
follow a download link for the apply form.
To Next Page
Loading...
