50 2599430000/00/04.2019
Cleaning
ATTENTION!
Printhead can be damaged!
• Do not use sharp or hard objects to clean the printhead.
• Do not touch protective glass layer of the printhead.
AUTION!
Risk of injury from the hot printhead.
Ensure that the printhead has cooled down before starting cleaning.
Figure 16 Heating line of the printhead
f Lift the printhead.
f Remove labels and transfer ribbon from the printer.
f Clean printhead surface with special cleaning pen or a cotton swab dipped in pure alcohol.
f Allow printhead to dry for 2–3 minutes before commissioning the printer.
To Next Page
Loading...
Need help?
General
