Weidmüller THM Plus S - Printer States

32 1357590000/00/03.12
Control Panel
3.4 Printer States
State Display Description
Ready
Ready
The printer is in the ready state
and can receive data.
Printing Label
Printing Label
and the number of the printed
label in the print job.
The printer is currently processing
an active print job.
Data can be transmitted for a new
print job.
The new print job will start when
the previous one has  nished.
Pause
Pause
and the symbol
The printing process has been
interrupted by the operator.
Correctable error
and the type of error
and the number of labels still
to be printed, display  ashes red.
An error has occurred that can be
recti ed by the operator without
interrupting the print job.
The print job can be continued
after the error has been recti ed.
Irrecoverable error
and the type of error
and the number of labels still
to be printed, display  ashes red.
An error has occurred that cannot
be recti ed without interrupting
the print job.
Critical error
Critical fault
and the type of error,
display  ashes red.
An error occurs during the system
test.
Switch the printer off and then on
again at the power switch.
Call Service if the fault occurs
persistently.
Power Save Mode
If the printer is not used for a
lengthy period, it automatically
switches to power save mode.
To exit power save mode: Touch
touchscreen display.
Table 2 Printer States