WEIHONG NK105 - Wiring; Signal Type

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
7 / 97
– :
• General NK105 with four axes: It is used to move A-axis in the
positive direction or input the figure 7.
• General NK105 with double Z axes: It is used to move Z2-axis in
the positive direction or input the figure 7.
– :
• General NK105 with four axes: It is used to move A-axis in the
negative direction or input the figure 1.
• General NK105 with double Z axes: It is used to move Z2-axis in
the negative direction or input the figure 1.
• Button combination
– + : Breakpoint resume.
– + : It is used to show help information.
– + : It is used to clear the workpiece coordinate of X-
axis.
– + :
• General NK105 with four axes: It is used to clear the workpiece
coordinate of Y-axis.
• General NK105 with double Z axes: It is used to clear the
workpiece coordinate of Z2-axis.