上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
8 / 97
– + : It is used to increase the spindle override.
– + : It is used to decrease the spindle override.
– + : It is used to move X-axis or Y-axis to the fixed point.
– + : It is used to select the workpiece coordinate system
(WCS) from G59 to G54.
– + : It is used to select the WCS from G54 to G59.
– + : It is used to do centering for X-axis.
– + : It is used to do centering for Y-axis.
– + : It is used to return to the machine origin (ie. the
origin of the machine coordinate system (MCS)).
– + : It is used to switch between workpiece coordinates
and machine coordinates .
– + : It is used to calibrate tool.
To Next Page
Loading...
