WEIHONG NK105 - Spindle

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
73 / 97
Approach Speed
• Unit: mm/min
• Range: [Jump Speed, Machining Speed]
• Default value: 600
• Effective: Immediately
• Description: The feedrate when the tool approaches workpiece during
positioning (the distance between the tool and workpiece is smaller than
deceleration distance).
Run Acc.
• Unit: mm/s^2
• Range: [0.001, 100000]
• Default value: 500
• Effective: Immediately
• Description: The maximum acceleration of each feed axis during machining.
Dry Run Acc.
• Unit: mm/s^2
• Range: [0.001, 100000]
• Default value: 500
• Effective: Immediately
• Description: The maximum acceleration of each feed axis during positioning.
Max. Turn Acc.
• Unit: mm/s^2
• Range: [0.001, 100000]
• Default value: 1000
• Effective: Immediately
• Description: The maximum acceleration of feed motion on adjacent axes.
Jerk
• Unit: mm/s^3
• Range: [0.001, 1000000]
• Default value: 150000
• Effective: Immediately
• Description: The change rate of acceleration of a single axis.