Weinmann MEDUMAT Standard2 - Page 52

52 EN MEDUMAT Standard
2
WM 68071 05/2021
4 Preparation and operation
1. Connect the ventilation hose to the ventilation hose
connection.
2. Connect the measuring circuit connector to the connection
for the measuring circuit.
3. If necessary: Connect the FlowCheck sensor
(see "4.4.3 Connecting the FlowCheck sensor", page 54).
4. If necessary: Connect MEDUtrigger (see "4.4.5 Connecting
MEDUtrigger", page 58).
5. If necessary: Connect the CO
2
measuring tube
(see "4.4.4 Connecting the CO
2
measuring tube", page 56).