Welbilt Convotherm 4 - Adjusting the Injection Pressure

9 Servicing / Cleaning
Training manual Convotherm 4 140
9.3.3 Adjusting the injection pressure
Component
Illustration Name
Injection unit
Tools required
None
Adjusting the injection pressure
1.
Pull the adjusting knob outwards to release it (1).
Adjust the injection pressure by turning the adjusting knob (2)
right or left.
 Table-top units: 1 bar
 Floor-standing units: 1.5 bar
2.
Press the adjusting knob back in until it locks in place.