EasyManua.ls Logo

Welbilt Convotherm 4 - Descaling the Cooking Chamber

Welbilt Convotherm 4
156 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9 Servicing / Cleaning
Training manual Convotherm 4 148
9.3.5.2 Descaling the cooking chamber
Parts required
Safety boots
Safety goggles
Protection equipment
ConvoCare (for slight limescale)
ConvoCal (for severe limescale)
ConvoClean or ConvoClean forte (for neutralizing after descaling)
Requirements
Check that the following requirements have been met:
The appliance is on.
Descaling the cooking chamber
1.
Perform oven cleaning before carrying out descaling (to remove
grease from the surface).
2.
Switch off the combi steamer and let it cool down if it is hot.
Caution: While any descaling chemicals are present in the
cooking chamber, the appliance must never be heated above
30 °C otherwise there is a risk of corrosion.
3.
Undo the two fasteners (1) on the suction panel.
Hinge out the suction panel to the right (2) into the cooking
chamber.

Table of Contents

Other manuals for Welbilt Convotherm 4

Related product manuals