Functional verification tests
The functional verification tests help to confirm the proper operation of the monitor and its options.
These tests support the requirements of routine preventive maintenance. It is not necessary to
disassemble the monitor to perform these tests.
The tests may also be useful as a diagnostic tool to help isolate a malfunction.
Each time you open the case and prior to returning the monitor to service, use the service tool,
Gold edition, to complete the full suite of tests to ensure that all systems are operating within the
design specifications.
Functional verification and calibration
Required equipment
Material no. Description Qty
01802-110 Tester, calibration, 9600 plus 3
DOC-10 Cable, SP02 extension, Nellcor 1
SRC-MAX Nellcor portable oximetry tester MP506 1
06138-000 CAL-KEY, assembly, M690/692 1
4500-30 Blood pressure hose, 5 ft. 1
5082-183 BP Y-tube, no fittings 1/8 in tube 1
103507 Masimo rainbow tester (Masimo part #2368) 1
4500-925 USB 2.0/5-pin type A to mini-B cable, gold, 6 feet 1
407691 Service test box 1
541-USB001 OAE, USB 6' cable 1
407022 Assy, MMF Nurse call cable - Service 1
713549 USB 2.0 Dual A to Single Mini B Cable 1
81
To Next Page
Loading...
