EasyManua.ls Logo

Westomatic GF Robimat XM - Maintenance and Component Cleaning; 5.4 Lint Filter Maintenance

Default Icon
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
Cleaning and maintenance
704 67 020 00 _ 111
OPERATING INSTRUCTIONSGF Robimat XL / XM
󳌍󵔂󵸊󵸈󱀕󵠆󱀍󵤏󶏁󵘊󵰕󵔓

There may be sharp edges inside the machine.
Wear protective gloves when cleaning the machine.

Insu󰀩cient cleaning of the lint lter may cause the chiller unit to fail! For this reason make sure to check
and clean the lint lter regularly.

Do not start the compressor more than 5 times per hour! Do not reduce the 5 minute minimum period of
idleness for the compressor!
Note: The vending machine is ready for vending every time the service key is inserted; the compressor
can be heard running.
Remove the u󰀨
Lint lter
Marking for correct
positioning
When inserting the lint lter make sure that it is pushed in until it reaches the stop (see marking).
If a cashbag (e. g. Safer System) is used instead of a cashbox, the drawer must be pulled out. It is then possible to
insert the lint lter without damaging the cashbag.

Table of Contents

Related product manuals