67
Transportation, Storage, Decommissioning, Disposal
704 67 020 00 _ 111
OPERATING INSTRUCTIONSGF Robimat XL / XM
The following safety instructions must be observed during transportation, loading, unloading:
• Move the machine only with a pallet truck or a fork lift. Place the forks on the wide side of the machine only.
Remove front and back kick plates. Lower the machine slowly.
• Do not transport the machine in the air.
• Always move the machine with care and caution.
• Prevent it from sliding sideways.
• Do not move the machine on inclined ramps, use stair-walkers.
• Prior to moving the machine with a pallet truck or a fork lift, please remove the kick plates!
• The transportation locks prevent the product compartments from unhinging, or the lift system from moving
inadvertently.
• Observe the machine's centre of gravity. Due to its design the centre of gravity can be high. Risk of tipping over!
Incorrect transportation can damage the machine.
When moving with a pallet truck: unsteady lowering can damage the machine.
Incorrect transportation can result in the machine tilting. For this reason the machine must be correctly
transported.
Ensure the rear of the machine does not become dented!
To Next Page
Loading...
