8
General
704 67 020 00 _ 111
GF Robimat XL / XM
OPERATING INSTRUCTIONS
• Before commissioning the machine, the operating instructions should be read and understood.
• When transporting, setting up, servicing and repairing the vending machine, strict adherence to the following
rules and guidelines - in their latest version - is required: EU guidelines, VDE regulations (Association of German
Electro-technical Engineers), Country-specic regulations, Accident prevention regulations, Industrial code, Trade
association guide-lines, Regulations of the utility company responsible.
• Machine installation and repairs should only be carried out by trained service engineers.
• This machine can be used by children from 8 years and above and by people with limited physical, sensory or
mental abilities or lack of experience and/or knowledge, provided that they are supervised by another person
responsible for their safety, or if they have received instructions on how to use the machine and are able to
comprehend the dangers resulting thereof. Cleaning and maintenance work on the machine should not be carried
out by children without supervision.
• Children should be supervised to ensure that they do not play with the machine. The machine is not suitable for
children under 3 years old.
• Damaged power cables must only be replaced by the manufacturer, authorised service centre or equally qualied
person in order to prevent serious accidents.
• Appliance plugs should never be inserted in sockets when damp or touched with wet hands.
• It is imperative that an FI-safety cut-out switch with 30 mA maximum leakage current is provided for the machine.
No higher than a 16A fuse should be used.
• Prior to all work on electric parts the machine must be unplugged from the mains supply.
• Disconnect the machine from the mains before cleaning.
• The machine must be xed to the wall or oor.
• The venting clearance between the back of the vending machine and the wall on site must be observed (5 cm
minimum).
• The vending machine in its standard conguration is only suitable for climate class N.
• The machine location must be dry and have heating installed.
• The machine must only be transported when empty.
• Do not clean the machine with a water hose or a high-pressure cleaner.
• Moving the lift system quickly by hand may damage it. For this reason both axes of the lift system should be
moved slowly.
• When the product basket is moved manually to the product delivery position (on the right), the sliding door unit
should not be pulled out. Risk of damage!
• Use only genuine spare parts.
• Any modication to, or conversion of, the machine is prohibited! SIELAFF rejects any liability for any defects
resulting in this way!
• The machine should only be used for dispensing beverages in cans and bottles.
• Only products approved by SIELAFF should be used.
• Inammable or explosive goods must not be vended.
To Next Page
Loading...
