63
Machine control board, Software
704 67 020 00 _ 111
OPERATING INSTRUCTIONSGF Robimat XL / XM
[MODEL standard
[AGE VERIFICATION] see Menu M7/ [MACHINE] none, active
[BILL ESCROW] see Menu M7/ [BILLVAL] stack immediate, enabled
[COOLING CONTROL] activates 2nd Temperature sensor in
FK 178 GB
temperature only, second sensor
[BT-TELEMETRY] Activates special handling of BT
telemetry
not installed, installed
[VEND-DEMO] Only for demonstration purposes! Do
not activate!
not installed, ignore empty
[CASH CLOSE] Activates deletion of statistics when
cashing-up at midnight
do not clear, clear daily
[JOURNAL] Deactivates journal writing with
Executive and BDV
write enabled, write disabled
[CARD] Activates transmission of sales
using pay cards when cashing-up at
midnight
no transfer, transfer daily
[ALT. PAYOUT] see Menu M7/ [COIN MECHANISM] disabled, enabled
[TUBE COUNT] see Menu M7/ [COIN MECHANISM] VMC controlled, COIN MECH contr.
[CARD REMOVAL] see Menu M7/ [COIN MECHANISM] after VEND, before VEND
[HELIX STOP] - only by MotorSW, by MotSW or LB
[MIXED PAYM.] see Menu M7/ [CARDREADER] allowed, not allowed
[ROBIMAT] Robimat lift control board is
recognised automatically
not connected, connected
[BDTA3.0] Display texts do not strictly follow
BDTA 3.0 any longer
strict, weak
[try DRAVP] Age verication is performed in
accordance with protocol DRAVP.
D only, always
[BDV-audit] Deactivates audit function in BDV enabled, disabled
[IR-readout] Deactivates IR data transmission enabled, disabled
[MDB-comp. mode] see Menu M7/ [CARDREADER] standard, b.Pract.
[BILLVAL usage] No function
[BILLVAL Vending] No function
[HELIX MODE] No function
[CUSTOMER SPEC.] Activates customer-specic settings
or customer-specic software
behaviour
none, CCAUS
[SOFTDROP] Activate/ deactivate Softdrop not connected, connected
To Next Page
Loading...
